| Main
Table of Contents
Back
Printer Friendly Version
|
|
- Drilling into or attaching hook straps, clamps or any other
fastening devices onto the exterior walls, roof or floor of a mobile
home could cause damage due to the presence of electrical wiring,
heating ducts, vapor barriers, etc. TELUS Communications Inc.
will not drill through floors and walls without written
permission. This is to be provided by the owner or customer.
- In the case of wiring installation in a mobile home, it may be
necessary to remove skirting to complete the installation. the
customer is responsible for the removal and replacement of the
skirting, to avoid the possibility of damage. TELUS
Communications Inc. will not allow its employees to work in areas
considered hazardous to their health.
- For the protection of your communications equipment, life and
building, TELUS Communications Inc. requires the placement on a No. 6
green insulated A.W.G. ground wire at the protector terminal.
This ground wore shall be connected to a suitable building ground
electrode and installed as per Canadian Electrical Code, Part 1.
Date Controlled Material
Use Current Version ONLY at Web Site:
http://www.telus.com/bics
Revision Date 2002-01-16
Bics AB
Copyright TELUS
|
